The innovation that is the Garbage Disposal has certainly simplified our kitchen cleanup and made our lives a lot less messier. If you’re planning to buy one, you’d really be doing yourself a favor but before doing so, you should be aware of certain things like for starters, how much is a garbage disposal?

Price Range of Garbage Disposals

Residential garbage disposals have varying prices depending upon their motor power. A unit with 1/3 horsepower (HP) for instance could cost between $50 to $115. If you up to a 1/2 HP model, the price generally increases to an amount of $60 to $180. For 3/4 HP, they range between $120 to $350 and finally, a 1 HP unit can cost anywhere between $150 to $380. Other factors where price depends upon is the garbage disposal’s brand name and construction quality.

There are also light-duty commercial-grade units that has a price range of $500 to $2,500. They generally increase depending on their brand, size and features.

Installation Cost of Garbage Disposals

If you don’t plan on a DIY project and would opt to hire the services of a plumber, it will certainly entail a cost but this will be affected by your choice of disposal and the condition of the area where you plan to connect it. Here are the different tasks that a garbage installation entail with their price of professional fees.

1. New Installation

Having a garbage installation would entail electrical and plumbing connections. If it’s the first time for your sink to have this machine, it would be wise to ask your contractor if it’s strong enough to withstand its vibrations during operation and if there’s a need for new wiring.

How your home is laid out basically determines the cost and complexity of the wiring work needed. Apart from this, the required amount of work as well as brand and model of the garbage disposal you have all contribute to the total cost of the installation which is a price range of about $97 to $188 USD.

2. Replacement of an Existing or Old Unit

Replacement of an existing garbage disposal with a new unit have higher chances of not needing any modifications in order for the latter to fit. The cost of labor for such a replacement depends on how easy it is to remove your old garbage disposal and the how much plumbing or repair is needed to install the new unit properly. The price ranges from $85 to $164 USD.

3. Installations with an On and Off Switch Already Given

The two types of garbage disposals, batch feed and continuous feed, require some installation work. The former is activated by putting a stopper in the frain while the latter is activated by an external switch which you can find mounted above the sink. If the type of disposal you are fitting is a continuous feed with its on and off switch already given, your installation labor fee would be somewhere between $89 to $172 USD.

4. Installations without an On and Off Switch

If your garbage disposal mandates an activation switch but you don’t have this in place, there is additional electrical work needed which will increase installation rates from $113 to $218 USD. It’s essential that you clear it out with your contractor if he will provide for the electrical work needed. If he doesn’t, you need to hire an electrician. If there’s a wiring near the site where the disposal was found, the installation task would be simplified; however, complete wiring required from your electrical panel to the kitchen will raise overall costs.

5. Installation of a Disposal Bought by the Homeowner

Garbage disposals have varying features that range from motor power, stainless steel grind chambers, dampening of sound, compatibility of septic tank and anti-jamming features. It can get pretty confusing in your selection so determine first which brand and model suits your requirements of usage. If you would opt to choose and buy the garbage disposal yourself, the installation cost would be from $95 to $183 USD. This means that your contractor would not need to supply the unit itself but there’s every possibility that he would still need to provide the parts or fittings necessary for the installation.

6. Installation of a Disposal Supplied by the Contractor

What’s your contractor for? Basically, he could recommend or supply the specific brand and model of garbage disposal for you based on how you’re going to apply and use it. As contractors do this based on their experience of the disposal’s quality and features, you can basically rely on their recommendations. It comes at a national price range between $91 to $177.

Conclusion

Now that we’ve already answered how much is a garbage disposal and you already have an idea of how much the different kinds of units cost and how much the installation fee is depending on different situations or scenarios, it would be easier for you to come up with a budget that’s realistic because you already know what to expect.

In your buying selection, a wise tip to remember would be to go for brands and models that fit your application and if any modifications are required to to fit your sink with the disposal. That way, you are making things not just simpler to do but more economical as well.

Read More

Above all else, the fundamental objective would be to cease from requesting that yourself how settle a refuse transfer. You can accomplish this by keeping it in top and prime condition through consistent support. There are times however when regular issues would in any case happen and it would require a couple of straightforward repairs. Here are some of these occurrences and tips on how you could best address them.

Presently, paying little mind to whatever sort of repair you speak the truth to do, one of the principle things to remember is the safety oriented mark of killing your rubbish transfer’s energy at the breaker and uprooting the sprinkle gatekeeper to make access less demanding. That said, you might now continue to making the essential repairs.

1. In the event that the Disposal Doesn’t Turn On

The most well-known reason for such episode is an electrical issue like a tipped circuit. Another conceivable fix is maybe you simply need to reset the gadget or fitting the whole framework. On the off chance that such are the cases, be grateful on the grounds that all won’t cost you anything.

2. On the off chance that there’s a Gentle Whir however Nothing is Happening

The fundamental offender could be a flywheel that is trapped. A flywheel is one of those little sharp edges in charge of cleaving up your nourishment waste. In such a case, the brilliant tenet to comply with is to never achieve your hands into the refuse transfer. A floor brush handle can be utilized to evacuate the flywheel. It may likewise be important to utilize the wrench that accompanied your unit or in the event that you don’t have a wrench, go to a repair shop that offers your transfer’s model. Take a stab at having water go through the transfer, while killing the switch on and on the grounds that risks the running water could take out the stuck flywheel.

3. In the event that there are Objects Stuck in you’re Disposal

Your transfer is certain to get stuck if any item falls through the splashguard. To settle this episode, get an electric lamp to find and distinguish the item that is creating the blockage. You may utilize metal tongs to remove the guilty party. On the off chance that this doesn’t do it, fall back on utilizing a unique turning apparatus that accompanies your unit (if accessible) or a floor brush handle. Once evacuated as of now, turn the force at the breaker on, run chilly water and turn the transfer on once more.

4. On the off chance that You Need to Use a Turning Tool or Jam Wrench

Most rubbish transfers are furnished with an Allen wrench that is intended to fit into a the gap found at its base. In the event that it doesn’t accompany it however, you can go to your nearby handyman shop and purchase one. Utilize a spotlight to discover the gap, embed the Allen wrench on it and after that turn the transfer forward and backward to release what’s stuck. After which, turn the breaker power on, run chilly water and turn on the transfer.

5. On the off chance that the Drain is Clogged

Stops up are generally created by collected nourishment stuck in your channel. How to alter a refuse transfer with this sort of issue? Utilize a normal channel cleaner first however in the event that it’s insufficient, be arranged to get staring you in the face and knees. Begin by setting a container under the channel. At that point, extricate the fittings on the P-trap utilizing a channel wrench. Take out the P-trap and with that off the beaten path, discover the stop up and get it out. In the event that you can’t discover the obstruct in the P-trap however, it might be important to string a wood screw or snake down the funnel so you could evacuate the stop up.

6. On the off chance that the Garbage Disposal is Leaking

You have to kill the gadget and after that check the jolts. In the event that all are still tight, it’s exceptionally proposed that you buy what they ca,, a “handyman’s putty” as this can help you stop the hole.

7. In the event that there is an Overload

As a rule, the explanation behind a sudden stop of turning in your waste transfer is on account of it detects an over-burden, at which case, it’s customized to consequently close off. Sit tight for a couple of minutes to permit the transfer to chill off. Most units have a reset catch found at the underside so once the unit is sufficiently cool, squeeze this reset catch, run icy water and turn it on once more. On the off chance that this doesn’t cut it, there may be some kind of problem with the rope or wiring; and soon thereafter, you may require the assistance of a circuit repairman as of now.

8. In the event that it’s Really Busted

There’s very little you can do to settle a junk transfer any longer. This implies, it’s chance to get another one.

Conclusion

Presently, as said in this present article’s presentation, the principle point, on the off chance that you have a junk transfer, is to avert needing to alter it in any case. That is the reason legitimate and standard upkeep is the way to keeping such from happening.

Fundamentally, junk transfers are not intended to take in immense lumps of nourishment so verify you toss in little bits of your sustenance squander just. When this has gone down the channel, run frosty water, turn on the transfer and let it keep running for around 15 minutes. In the event that you need to hone the cutting edges of you’re transfer, remember that the main safe thing to use for such a reason for existing is ice.

That said, we trust that fitting utilization and standard upkeep can spare you from having the issue of how to alter a junk transfer as its abuse could prompt a substitution which can be really overwhelming on your wallet.

Read More